Español English
URACA plunger pumps
AAP is the only represenor fo URACA in Spain. URACA plunger pumps are well known as one of the most robust and reliable pumps all over the market of high pressure. Its catalogue of pumps goes from 3 to 7 piston pumps. Pressures and flow rates as high as 3200 bar and 10000 L/min can be achieved. At the bottom of this page you will also find the test pumps that URACA offers.

P3-08
Small but powerful, that is the way the little sister of URACA pumps it is. Flow rates and pressures till of 163 L/min and 200 bar are allowed.

Technical data

P3-10
P3-10 could be found in 3 different version: A1, A2 and B. The maximum flow rate is the same as P3-08 but the P3-10 can work at 1000 bar of maximum pressure (20 L/min).

Technical data

P3-45
The P3-45 pump is the response of URACA to the need of sewer cleaning professionals of working with recycled water and extreme inclination angles of the pump. A pump able to eject 473 L/min at 150 bar and 292 L/min at maximum service pressure 250 bar.

Technical data

KD708
KD708 is avaible in 3 differents models: A1, A2 and C1. Maximum flow rate of 295 L/mincan be achived at 135 bar. The maximum service pressure is found for C1 version, built with a robuster liquid end: 1200 bar with a flow rate of 30 L/min.

Technical data

KD716
The versatility of this pump could be seen by the 6 differents liquid ends avaible. From the maximum flow rate of 387 L/min (140 bar) to the maximum service pressure of 2800 bar (14,7 L/min) this pump offers an outstanding performance.

Technical data

KD724
This magnificent and robust pump is capable of ejecting 548 L/min at 170 bar (A1 version). Version D offers the maximum operating pressure: 2800 bar at 22 L/min.
3200 bar new version now avaible!!

Technical data

KD725
KD725 pump can be shown with 4 different liquid ends. Version A presents the maximum operating flow rate 700 L/min at 200 bar. Version D offers 2800 bar of maximum pressure at 28,5 L/min as the maximunm flow rate at this highest pressure.

Technical data

KD626
Pump desgned to obtain a flow rate as high as 1019 L/min at 165 bar (version A). Version B allows 800 bar of maximun pressure (165 L/min).

Technical data

KD629
This wonderfull pump is capable o ejecting 2005 L/min at 160 bar. 1160 bar is the highest operation pressure. At this pressure we can achieve 266 L/min.

Technical data

KD412
It is able to work at 1200 bar of pressure with a flow rate of 202 L/min (version C). At 400 bar the maximun flow rate achieved is 658 L/min.

Technical data

P4-70
URACA´s 4 piston pump. The pressure limit of this pump stands at 2800 bar with a flow rate of 56 L/min. The maximum flow rate is 950 L/min at 250 bar. Avaible in 4 different liquid ends.

Technical data

P5-70
P5-70 belongs to the 5 piston pumps family. Maxium operatin pressure is 2800 bar with a maximum flow rate at this pressure of 70 L/min. Maximum flow rate at 250 bar is 1190 L/min. Avaible in 4 different liquid ends.

Technical data

Px-80 series
Pumps for the future: process pumps able to handle almost any kind of fluid, from acids to bases, low and high viscosity fluids, toxics or abrasives. Px-80 are formed by 3 different pumps: 3 plungers P3-80, 5 plungers P5-80 and 7 plungers P7-80. All three can reach 1600 bar and the maximum flow rates at 100 bar are respectively, 945, 1575 and 2210 L/min.

Technical data

P5-96
5 plungers process pump ready, designed and constructed for handling agresives fluids and chemical reactants as ammonia or carbamate. Huge flow rate of 10970 L/min at 130 bar. Flow rate at 360 bar is 3890 L/min. The definitive process pump.

Technical data

Serie KD800
KD800 series are composed of 5 pumps specially designe for handling agresive fluids. Next you will find the basic characteristics for each pump:
  • KD811 pump has its pressure limit at 630 bar with a flow rate of 158 L/min. Flow rate goes to a maximum of 1160 L/min at 85 bar.
  • KD821 pump has its pressure limit at 820 bar with a flow rate of 155 L/min. Flow rate goes to a maximum of 1160 L/min at 110 bar.
  • KD822 pump has its pressure limit at 820 bar with a flow rate of 260 L/min. Flow rate goes to a maximum of 2080 L/min at 110 bar.
  • KD823 pump has its pressure limit at 820 bar with a flow rate of 392 L/min. Flow rate goes to a maximum of 3248 L/min at 100 bar.
  • KD825 pump has its pressure limit at 675 bar with a flow rate of 840 L/min. Flow rate goes to a maximum of 4550 L/min at 130 bar.
  • KD827 pump has its pressure limit at 650 bar with a flow rate of 1470 L/min. Flow rate goes to a maximum of 4988 L/min at 130 bar.

Technical data

URACA test pumps
URACA offers a wide range of test pumps from hand-operated to motor driven.

Hand-operated test pumps
Hand-operated piston pumps are ideal if motor drive is not required. They are capable of working up to 1000 bar and they are constructed with rust-free materials guarateing the maximum liability of the unit. Moreover, HP32 series are equipped by default with safety valve.

Technical data

Engine driven test pumps
These pumps can be driven with electric or fuel engines (VP601/200). The maximum service pressure is 350 bar for intermitent service at a flow rate of 5 L/min.

Technical data

© Aplicaciones en Alta Presión, S.L. - Fundidores, 19 - Pol. Ind. "Los Ángeles" 28906 GETAFE (Madrid)